At present, laser cutting machines are gradually replacing traditional processing equipment. It has the characteristics of high precision, fast cutting speed, no cutting pattern restrictions, automatic typesetting, material saving, smooth incision, low processing cost, and has great advantages compared with traditional flame, stamping and other processing technologies. What are the factors that affect the processing accuracy of laser cutting machine? Why can't you just cut it off?
Materials: Materials include many aspects, such as machine tools, beams, guide rails, etc. The guide rail is mounted on the machine tool. If the machine deformation is severe, the beam will also be twisted with the machine when it is fixed. When the device is running, it is not on one of the levels, so the distance it actually leaves will change, resulting in reduced accuracy; After the beam is deformed, the guide rail will be installed on it and will change with the deformation of the beam... Material still has a big impact on cutting accuracy, which is why some cutters have copper plates on the beam base, while some are on the guide rail.
Assembly: Equipment is very important for assembly. For the same kind of accessories, different people have different cutting accuracy; After all, these materials are manually installed. The position is slightly off, the hole is slightly tilted, and the distance of the equipment in operation is different...... Assembly plays a very important role in the processing accuracy of laser cutting machine.
Uneven countertop: some equipment use a long time, the countertop will sink, resulting in the material on the right countertop, the material will also be uneven with the countertop, resulting in the equipment cutting process cutting distance error, will also affect the cutting accuracy.
Uneven materials: Some materials have uneven surfaces, especially thin acrylic sheets; We put the materials on the table. During the cutting process, the laser head does not change its focus according to the non-uniformity of the material, which will cause a deviation between the distance stepped out and the cutting size. Article from the Internet, if there is infringement or violation, please contact us to correct.
English