1. The speed of the laser welding machine has a great impact on the power of the laser welding machine. The speed of the welding machine is directly proportional to the power of the laser welding machine. At the same time, the quality of the welding machine is related to the quality of the laser beam and the characteristics of the laser beam focusing system, that is, the size of the focused laser beam has a great impact on the quality of the laser.
2. The distance between the nozzles and the distance between the workpiece and the nozzle will also affect the power of the laser welding machine. Too long a distance will cause unnecessary waste of kinetic energy, and too close a distance will affect the diffusion capacity of the splash welder. The appropriate distance is 0.8mm. In addition, the laser welding machine mainly welds the workpiece with an uneven surface through the following adjustments, and the height of the nozzle and the workpiece should always be the same during operation.
3. The focus position will affect the accuracy of the welding machine, especially the focus diameter. The focal spot diameter should be as small as possible to produce a narrow slit, the focal spot diameter is proportional to the focal depth of the focusing lens, the smaller the focal depth, the smaller the diameter of the focal spot.
4. Auxiliary gas, auxiliary gas and gas pressure will also affect the power of the laser welding machine. If the thickness of the material increases or the speed of the welding machine is slow, the gas pressure should be appropriately reduced. Using a low-pressure welder can prevent frosting on the edge welder. Article from the Internet, if there is infringement or violation, please contact us to correct.
English