Nowadays, more and more laser cutting machines are used in pipe plants. Laser cutting machine efficient, intelligent, labor-saving, high output. The key is that the employees work easily and are loved by the pipe factory. Especially high-speed laser cutting machine, beautiful incision, no burrs, high precision. Of course, no matter what device is used, safety is still the number one priority. The following are some precautions about the use of laser cutting machines.
1, before operating the laser cutting machine, the operator must read the instructions carefully.
2, laser cutting machine operators must be trained before the job, and there is a special person responsible, not to use without training, so as to avoid accidents.
3, the laser cutting machine before wiring power, must be safely grounded. To ensure safety, do not use the machine without external grounding.
4. The laser cutting machine is equipped with an emergency button, which can stop the machine immediately if necessary.
5, before starting the laser cutting machine, check whether the saw blade safety cover is firmly installed.
6. The power supply must be cut off when installing or replacing the saw blade.
7, when installing the saw blade, it should be noted that the number of teeth of the selected saw blade matches the pipe wall, the direction of the saw blade should be consistent with the rotating arrow, and gently lift the saw blade by hand before tightening the screw to eliminate the assembly gap of the saw blade.
English