Laser welding machine is a modern non-contact welding technology, widely used in several fields, has produced incalculable profits, but also to many manufacturing stores to give the most convenient and efficient production and processing methods, but only the equipment, there will be more or less common small failures or problems. The situation that the flame becomes weak during welding is one of them.
Laser welding machine
The main optical path laser deflection: Solution: adjust the main optical path full reverse and semi-reverse diaphragm, select the image paper to check and adjust the light point, focusing glass lens damage or environmental pollution solution: replace or clean the laser welding machine focusing lens and maintain the lens.
Laser generator resonator diaphragm damage or environmental pollution, the solution: disassemble or clean laser welding machine resonator reflection diaphragm; The net brake is not completely springback solution: check the laser welding machine and add grease to the net brake connector, so that the connector manufacturer can smooth.
The protection gas is too large, the solution: adjust the total flow of the protection gas of the laser welding machine. The life of the xenon lamp is up. Solution: Check and clean the old lamp or replace the new xenon lamp; The laser has no output from the center of the copper nozzle below the focusing nods. Solution: Adjust the 45 degree reflection diaphragm to make the laser output from the center of the nozzle.
English