In the entire production process of the laser cutting machine, the requirement for accuracy is also very high, but many times you will find that the accuracy of the equipment you just bought, or the entire equipment after a period of use, is not so accurate. In this case, how to adjust the accuracy of the laser cutting machine?
From the current situation, the accuracy of the laser cutting machine must pay attention to the above key points in the debugging process. The spots of focused laser light are often easily mixed into shot glasses. In this case, the relevant setting of the initial intoxication effect will be performed, and the position of a series of focal lengths will be determined by the size of the spot effect.
Of course, as long as you realize that the laser spot reaches a small drunkenness, the other position is the drunkenness processing focal length. In this case, we can set the location of that place, and then we can make such a device work.
In addition, when adjusting the first half of the laser cutting machine, a number of different props can also be used. For example, adjustments are often very important. Of course, in general, they can debug with a variety of focal lengths and can master a lot of precision.
At the same time, you can also move the laser up and down, because only then can you have some control over the height. In addition, the size of the laser spot will vary. After several adjustments, you can find the right focal point and then determine the relevant location. Article from the Internet, if there is infringement or violation, please contact us to correct.
English