Laser welding machine equipment is not the same lens cleaning methods are generally what? The laser lens is simply a lens mounted on the laser diode, which is used to gather the laser beam. It is divided into a gathering mirror and a reflecting lens, etc., the material is or arsenic zincide.
Laser welding machine
The production of laser welding equipment is a new type of welding process, mainly for thick wall materials, detailed parts of the electric welding, welding, butt welding, overlap welding, sealing welding, etc., the length width ratio is high, the total welding width is small, the thermal hazard area is small, the deformation is small.
Cleaning of clustered lenses: Pay attention not to excessive effort when disassembling, and not to bump with hard pieces. Machinery and equipment must work to ensure that the standard air pressure. The cleaning standard of aggregate lenses is zero contamination and as little cleaning as possible.
If there is environmental pollution, it needs to be cleaned up immediately. When cleaning the lens, use a lab-grade paper plate soft cotton, dip in an appropriate amount of acetone or high purity ethanol, and quietly rotate clockwise from the management center of the lens to wipe the border. Both sides of the lens are required to be cleaned when necessary, and you should be careful when scrubbing.
Reflector lens cleaning: remove the lens from the frame; Mirror facing up, put the lens paper on the mirror; Drop a small amount of acetone on the lens paper and gently pull the lens paper over the mirror; Repeat the above process until the mirror is cleaned, no dirt and residual stains are left on the mirror; Then put the lens into the lens holder.
If the molybdenum mirror is used as a reflective lens, because it can not be coated, it can be applied immediately after polishing, so it can be cleaned by tap water (soap or water containing detergent). However, other coated lenses can not be cleaned with tap water, because many coatings melt strong electrolytes, and the lenses will be destroyed.
Lens cleaning: Roll the lens paper into what price, wet with a small amount of pure acetone analysis; Use wet lens paper to quietly scrub the lens surface, be careful not to press the lens with your fingers; Repeat several times until the surface of the lens is cleaned and no dust and residual marks are left on the mirror; Dry with dry gas.
If necessary, you can fold the lens paper wet with a small amount of acetone into a rod and quietly scrub the surface of the lens to remove heavy stains. It should be noted that acetone is easy to digest and absorb moisture from the air and pollute the acetone itself, so it is necessary to close the acetone bottle, and do not pour the remaining acetone liquid back into the new acetone bottle after cleaning.
English