Laser welding machine has been widely used for its characteristics of small weld, fast welding speed and no porosity. However, many people do not know how to use a laser welding machine properly when operating it. In fact, there are many safety specifications for laser welders in use.
Read the operating instructions carefully, and operate the laser welding machine in strict accordance with the operating procedures to ensure the safety of equipment and personnel. The circulating water in the laser welding machine must be kept clean, otherwise it will affect the output of the laser. Users can determine the cooling water replacement cycle according to the start time, water quality and other conditions.
In general, the hydration cycle is shorter in summer than in winter. The laser welder housing needs to be connected to the safety ground. During work, do not face the laser beam with your eyes, and do not let your body (such as your hands) touch the laser beam to avoid injury.
Pay attention to keep the environment and laser welding machine clean, check whether the laser rod and optical components are contaminated. If the laser welder needs to be repaired, the power supply must be cut off, and the charge on the energy storage capacitor must be discharged before the repair to avoid electric shock. If an abnormal phenomenon occurs during operation, turn off the power (press < scram And air switch) for inspection.
The above are some safety operation specifications of laser welding machine. Only by mastering these specifications can we avoid problems when using laser welders. Therefore, it is necessary to understand the above points.
English