According to the grasp of the electric welding industry, it can be seen that today's laser welding machines and equipment have gradually obtained open applications, and have obtained reasonable marketing promotion in many different industries.
Laser welding machine
Because the advantages of automatic welding machine equipment are more, it can completely improve the contemporary production and manufacturing welding process regulations, because the continuous development and design of technical professional manufacturers have expanded the application scope of laser welding machine, what is the type of laser welding machine at this stage?
For the new development and design of laser welding machine, because of the continuous development of the type, it can completely reach the application regulations of different industries, and now the key includes intelligent laser welding machine, plastic laser welding machine, portable laser welding machine and many other different types.
Therefore, customers can carry out the selection and application according to the specific situation, and then meet the specific requirements of contemporary industrial production, for today's laser welding machine, according to the development and design of technical professional manufacturers, the use of automatic feeding equipment in the application, and commodity components arrive at the welding position, It can be fixed according to the technical professional equipment to produce and process components to complete the goal of accurate electric welding.
Before adjusting the output mirror, the condenser cavity equipped with the YAG rod should be removed to prevent the accuracy of the adjustment from being jeopardized by the mapping error of the YAG rod in the laser optical path. The precise position of the output media pulse damper should be so that the red light is located in its central position to be able to completely reflect the red light back to the red light exit perforation, otherwise it should be carefully adjusted according to the knob of the pulse damper frame. Note that after the adjustment, the clamp ring on the adjustment knob of the pulse damper frame should be completely tightened to ensure the reliability of its position, and then check again whether the position of its refracted light is maintained at the origin.
Check the installation position of the YAG rod. Stick the transparent tape on both sides of the YAG rod sleeve, observe whether the red light spot is in the middle of the waterproof sleeve of the two rods, if there is an error, it should be adjusted according to the position of the condenser cavity. Subsequently, the position of the refracted light of the YAG rod should be observed and overlapped with the perforation of the red light. Otherwise, the position of the condenser cavity should be adjusted under the premise that the red light should be maintained in the center of the waterproof sleeve of the rod as far as possible, so that the refracted light is as close as possible to the perforation, and the error between the refracted light and the perforation should be ensured to be less than 1 mm.
We need to check the location of the gate. Manually rotate the reflective lens support frame, send the net gate to the lighting position, observe whether the red light is in the middle of the eye lens, the refracted light is not located on the digestion and absorption cone in the center of the light line stop, if the position is wrong, it can be slightly adjusted.
English