With the continuous development and update of technology, although the operation of laser cutting machine is more and more convenient, it also needs to pay attention to safety in daily use. How to use laser cutting machine safely? How to use laser cutting machine correctly? This is a question we should think about. In fact, many people do not have a real set of operational safety rules in mind. How to use laser cutting machine for safe operation?
Check whether the water temperature of the laser and cooler is normal before daily work. Check whether the air pressure meets the requirements: check whether the exhaust fan, dryer, industrial circulating water cooler is working normally. Check whether the focusing lens is contaminated (the carbon dioxide laser directly pulls out the lens for observation, and after running the fiber laser for half an hour, feel whether the temperature of the focusing lens shell is abnormal with your hand, and then start the device after confirming that there is no anomaly.)
In daily work, start the machine in strict accordance with the switching sequence to prevent burning the electrical parts of the machine. Do not turn on the power switch with wet hands to prevent electric shock. When turning on liquid gas, do not face the exhaust port of the gas to prevent frostbite. Wear antifreeze gloves during operation. It is forbidden to smoke near the gas or in the workshop to prevent fire.
Confirm material type, thickness and size when cutting. After entering the program and adjusting the cutting parameters, simulate the cutting program to ensure that it is correct before performing the cutting program. The radiation protection door of the machine must be closed when operating the machine.
When operating IPG laser, you must wear anti-radiation glasses, otherwise do not operate the machine. During the cutting process, do not look at the cutting spark with naked eyes; otherwise, your eyes will be hurt. Non-professionals are strictly prohibited from opening the laser housing to prevent electric shock.
When operating the machine, do not allow the operator to leave the console. During operation, if the part rotation needs to be dealt with, the program must be paused, the magnification adjusted to "0" and turned off before entering the machine workspace to deal with the fault. During the process of troubleshooting, the operator must not enter the operation area to operate the machine.
In the production of laser cutting machine, it is necessary to pay attention to the operation process and precautions to avoid accidents. Only standard operation can ensure safe production and protect themselves from damage.
English