Adjust the parameters of the laser pipe cutting machine to improve the cutting speed of the machine. The setting of machine parameters is one of the main reasons that affect the cutting speed of automatic laser cutting machine. Generally speaking, if the parameters are not adjusted well, the cutting speed is not good.
Well-parameter ratios are a series of actions related to driving, starting, accelerating, and so on. When adjusting this parameter, note the following: Initial speed: This setting is the startup speed of the machine. Many customers have the misconception that the bigger the initial speed, the better. But in fact, this is wrong.
Laser automatic pipe cutting machine if the starting speed is set too high, the machine shake will be very large. Acceleration: is the time from the initial speed of the machine to the normal cutting. When the machine cuts different patterns, it is a continuous process of starting and stopping. If the acceleration is set too low, the machine will cut slowly.
Adjust the assembly of the automatic laser pipe cutting machine to improve the cutting effect of the machine. Guide rail installation: Guide rails should be installed in parallel. If the installation is not parallel, the machine will run with resistance. It gets stuck when walking and jagged when cutting. Therefore, the installation of the two guides in the Y direction must be two parallel lines, and there must be no error between them.
Beams and couplings are not well positioned. When the machine beam and coupling are installed, the screw is not locked, or when locked, the screw is tilted, and so on.
English