How Does The Laser Welding Machine work in The Heater

How does laser welding machine weld on heater? Fiber laser welding machine transmission from the surface is flexible. In the welding process, ordinary equipment may encounter various problems, these problems are very difficult, but easy to solve. In other words, it is upgraded on the basis of normal equipment.

It uses a high-energy laser beam coupled to an optical fiber with a long transmission distance, and then uses a collimator to collimate parallel light, focusing the laser beam on the workpiece. More maneuverability, naturally. The technical characteristics of laser welding machine: the weld is firm and beautiful, the heat affected zone is small, the weld is flat and has no porosity, and the strength and toughness of the weld are at least equal to or more than the base material.

Welding speed is fast. Compared with the traditional fixed optical path or welded joint welding method, the efficiency can be increased by more than 10 times. It has great advantages in the field of facet path welding. The optical elements in the system use high-quality lenses and are compatible with a variety of lasers.

The system can be equipped with coaxial visual positioning system to accurately locate and guide the welding position; Modular design and; The software interface is simple, easy to operate; It can realize spot welding, butt welding, lap welding and seal welding of thin-wall materials and precision parts.

Due to the high laser power, the welding process has a good depth-to-width ratio, small deformation and fast welding speed. Good quality, all welding personnel can see, flat without porosity. User-friendly design, LCD display and push-button operation make it easier for operators to get the job done.

The table adopts a rotating system, which can realize spot welding, linear welding, ring welding and other automatic welding. It has the characteristics of wide application range, high precision and fast speed. The change of current waveform can be arbitrarily adjusted, and different parameters can be set according to different welding materials, so that the welding parameters match the welding requirements, and finally achieve the best welding effect.